{"id":49186,"date":"2026-07-17T09:44:27","date_gmt":"2026-07-17T09:44:27","guid":{"rendered":"https:\/\/www.cnshining.com\/?p=49186"},"modified":"2026-07-17T09:44:28","modified_gmt":"2026-07-17T09:44:28","slug":"3-piece-can-vs-2-piece-can","status":"publish","type":"post","link":"https:\/\/www.cnshining.com\/ru\/3-piece-can-vs-2-piece-can.html","title":{"rendered":"3 Piece Can vs 2 Piece Can: Which Is Better for Food?"},"content":{"rendered":"<article>\n\n<p>A food can has to survive filling, closing, retort sterilization, storage, transport, and stacking. That is the real starting point.<\/p>\n<p>The choice between a 3-piece can and a 2-piece can is not about which structure looks better on paper. It depends on the food, the process, the can size, and the production volume.<\/p>\n<p>Before choosing a can type, ask a few direct questions.<\/p>\n<p>Does the food need high-temperature sterilization? Is it acidic, low-acid, oil-packed, brined, syrup-packed, or dry? Is the package a small retail can, a family-size can, or a large foodservice can? Do you care more about cost, appearance, sealing reliability, size flexibility, or high-speed production?<\/p>\n<p>These questions usually point to the right answer faster than a simple &ldquo;2-piece vs 3-piece&rdquo; comparison.<\/p>\n<h2>1. What Is a Three Piece Food Can?<\/h2>\n<p>A three-piece food can is made from three main parts: the can body, the top end, and the bottom end.<\/p>\n<p>The can body is usually made from tinplate. The bottom end is commonly made from tinplate or TFS (tin-free steel), while the top end and easy-open end can be made from tinplate, TFS, or aluminum.<\/p>\n<p>The body starts as a flat rectangular metal sheet. The sheet is rounded into a cylinder, then welded along the side seam. After welding, the seam area is coated and cured to protect the exposed metal. The body is then flanged, beaded if needed, and seamed with the bottom end. The top end is usually attached later by the food filler after the product has been filled.<\/p>\n<p>The side seam is the main structural difference. It gives the can maker more freedom in body height and capacity, but it also adds one more area that must be controlled.<\/p>\n<h3>Key features of 3-piece food cans<\/h3>\n<p>A 3-piece can has a welded side seam and two seamed ends. Its structure is simple to understand, but the process control is not optional.<\/p>\n<p>Typical features include:<\/p>\n<ul>\n<li>Body made from a rectangular metal sheet<\/li>\n<li>Welded vertical side seam<\/li>\n<li>Top and bottom ends seamed to the body<\/li>\n<li>Flexible height and diameter options<\/li>\n<li>Good fit for multiple capacities and product lines<\/li>\n<li>Suitable for many food categories and large foodservice sizes<\/li>\n<\/ul>\n<p>This structure is widely used for vegetables, beans, tomato products, soups, sauces, powders, nuts, edible oils, dry foods, and large institutional cans.<\/p>\n<p>Why is it still so common? Because food packaging is not always about maximum line speed. Many products need different can heights, different filling weights, and different market formats. A 3-piece can handles that well.<\/p>\n<figure>\n<a href=\"https:\/\/www.cnshining.com\/image\/metal\/three-piece-food-can.webp\"><img alt=\"Three-piece food can with a welded side seam and beaded body\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/www.cnshining.com\/image\/metal\/three-piece-food-can.webp\" title=\"Three-Piece Food Can\"\/><\/a>\n<figcaption>A three-piece food can with a welded side seam and beaded body.<\/figcaption>\n<\/figure>\n<h2>2. What Is a Two Piece Food Can?<\/h2>\n<p>A two-piece food can is made from one formed body and one separate can end.<\/p>\n<p>The bodies of shallow drawn cans and DRD cans are usually made from tinplate, TFS (tin-free steel), or aluminum, while DWI can bodies are usually made only from tinplate. Can ends and easy-open ends can be made from tinplate, TFS, or aluminum.<\/p>\n<p>The body includes the side wall and the bottom. It is formed from a single piece of metal, so there is no welded side seam and no separate bottom end. After food filling, the open end is closed by double seaming with the top end.<\/p>\n<p>This structure removes one possible leakage interface. It also creates a different manufacturing challenge: the can body must be drawn, redrawn, or wall-ironed from one metal blank.<\/p>\n<h3>Key features of 2-piece food cans<\/h3>\n<p>A 2-piece can has a seamless body. The bottom and side wall are integrated.<\/p>\n<p>Typical features include:<\/p>\n<ul>\n<li>One-piece body with integrated bottom<\/li>\n<li>One separate top end<\/li>\n<li>No welded side seam<\/li>\n<li>Smooth body surface without a welded side seam (DWI cans often still use beads to improve side-wall stiffness.)<\/li>\n<li>Good structural consistency<\/li>\n<li>Suitable for stable, high-volume formats<\/li>\n<li>Common in shallow cans, DRD cans, and DWI cans<\/li>\n<\/ul>\n<p>Two-piece food cans are often used for seafood, meat, pet food, dairy-style products, ready meals, shallow containers, and some soup applications.<\/p>\n<p>The manufacturing route matters. Shallow drawn cans can be formed with one drawing operation. DRD cans are formed through drawing and redrawing. DWI cans are drawn and wall-ironed, which makes the wall thinner and the body taller.<\/p>\n<p>So &ldquo;2-piece can&rdquo; is not one single process. The right route depends on the shape, height, material, coating method, and final food application.<\/p>\n<figure>\n<a href=\"https:\/\/www.cnshining.com\/image\/metal\/two-piece-food-can.webp\"><img alt=\"Seamless two-piece food can with a beaded side wall\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/www.cnshining.com\/image\/metal\/two-piece-food-can.webp\" title=\"Two-Piece Food Can\"\/><\/a>\n<figcaption>A seamless two-piece food can with a beaded side wall.<\/figcaption>\n<\/figure>\n<figure>\n<a href=\"https:\/\/www.cnshining.com\/image\/metal\/round-two-piece-food-can-with-easy-open-end.webp\"><img alt=\"Round two-piece food can with an easy-open end\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/www.cnshining.com\/image\/metal\/round-two-piece-food-can-with-easy-open-end.webp\" title=\"Round Two-Piece Food Can with Easy-Open End\"\/><\/a>\n<figcaption>A round two-piece food can with an easy-open end.<\/figcaption>\n<\/figure>\n<figure>\n<a href=\"https:\/\/www.cnshining.com\/image\/metal\/rectangular-two-piece-food-cans.webp\"><img alt=\"Rectangular two-piece food cans with easy-open ends\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/www.cnshining.com\/image\/metal\/rectangular-two-piece-food-cans.webp\" title=\"Rectangular Two-Piece Food Cans\"\/><\/a>\n<figcaption>Rectangular two-piece food cans with easy-open ends.<\/figcaption>\n<\/figure>\n<figure>\n<a href=\"https:\/\/www.cnshining.com\/image\/metal\/shaped-two-piece-food-cans.webp\"><img alt=\"Shaped two-piece food can body examples\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/www.cnshining.com\/image\/metal\/shaped-two-piece-food-cans.webp\" title=\"Shaped Two-Piece Food Cans\"\/><\/a>\n<figcaption>Examples of shaped two-piece food can bodies.<\/figcaption>\n<\/figure>\n<h2>3. 3-Piece Can vs 2-Piece Can: Main Differences<\/h2>\n<div class=\"table-scroll\">\n<table><caption style=\"caption-side:top;text-align:center;font-size:20px;font-weight:600;padding-bottom:12px;\">3-Piece vs 2-Piece Food Can Comparison<\/caption><thead><tr><th scope=\"col\">\u0424\u0430\u043a\u0442\u043e\u0440<\/th><th scope=\"col\">3-Piece Can<\/th><th scope=\"col\">2-Piece Can<\/th><\/tr><\/thead>\n\n\n\n\n\n\n\n\n\n\n\n\n\n<tbody><tr><td>\u0421\u0442\u0440\u0443\u043a\u0442\u0443\u0440\u0430<\/td><td>Body + top end + bottom end<\/td><td>One-piece body with integrated bottom + top end<\/td><\/tr><tr><td>Side seam<\/td><td>Has welded side seam<\/td><td>No side seam<\/td><\/tr><tr><td>Bottom structure<\/td><td>Separate bottom end seamed to body<\/td><td>Bottom formed as part of body<\/td><\/tr><tr><td>\u041f\u043e\u044f\u0432\u043b\u0435\u043d\u0438\u0435<\/td><td>Traditional food can appearance<\/td><td>Smooth and seamless body surface<\/td><\/tr><tr><td>Size flexibility<\/td><td>More flexible in height, diameter, and capacity<\/td><td>More limited by tooling and forming process<\/td><\/tr><tr><td>Shape options<\/td><td>Usually used for round cans, with some shaped designs depending on equipment<\/td><td>Shallow drawn cans and DRD cans can support different package shapes, including round, rectangular, tapered, bowl-like, and other shaped cans<\/td><\/tr><tr><td>Material options<\/td><td>Body is usually made of tinplate. Bottom end is commonly made of tinplate or TFS (tin-free steel). Top ends and easy-open ends can be made of tinplate, TFS, or aluminum.<\/td><td>For shallow drawn cans and DRD cans, the body is usually made of tinplate, TFS (tin-free steel), or aluminum. For DWI cans, the body is usually made only of tinplate. Top ends and easy-open ends can be made of tinplate, TFS, or aluminum.<\/td><\/tr><tr><td>Production fit<\/td><td>Better for multiple SKUs and varied sizes<\/td><td>Better for stable, high-volume SKUs<\/td><\/tr><tr><td>\u0421\u0438\u043b\u0430<\/td><td>Strong when welding, coating, flanging, and seaming are controlled<\/td><td>Good integrity due to seamless body<\/td><\/tr><tr><td>Coating focus<\/td><td>Side seam coating is a key control point<\/td><td>Coating must survive drawing or forming<\/td><\/tr><tr><td>Typical uses<\/td><td>Vegetables, beans, tomato products, soups, sauces, dry foods, large cans<\/td><td>Seafood, meat, pet food, condensed milk, shallow cans, ready meals<\/td><\/tr><tr><td>\u041b\u0443\u0447\u0448\u0438\u0439 \u0432\u0430\u0440\u0438\u0430\u043d\u0442<\/td><td>Flexible sizes, diverse products, large cans<\/td><td>High-volume, consistent formats<\/td><\/tr><\/tbody><\/table>\n<\/div>\n<p>The short answer is this: 3-piece cans are better when size flexibility and SKU variety matter. 2-piece cans are better when the format is stable, the volume is high, and the seamless body gives a clear advantage.<\/p>\n<h2>4. Advantages and Limitations of 2-Piece and 3-Piece Cans for Canned Food<\/h2>\n<h3>4.1 Advantages of Three Piece Food Can<\/h3>\n<h4>1. Flexible sizes and capacities<\/h4>\n<p>A 3-piece can body is made from a rectangular sheet. Changing the can height or capacity is usually easier than changing a deep drawing tool.<\/p>\n<p>This makes it suitable for multiple SKUs, seasonal products, foodservice cans, and large-capacity formats.<\/p>\n<h4>2. Good fit for medium-volume production<\/h4>\n<p>For products with several sizes or uncertain demand, a 3-piece can is often easier to manage.<\/p>\n<p>It does not require a dedicated forming tool for every height. That reduces the risk when the product range is wide or the annual volume is not high enough for a dedicated 2-piece line.<\/p>\n<h4>3. Suitable for direct printing<\/h4>\n<p>The metal sheet can be coated, printed, varnished, and baked before the body is rounded and welded.<\/p>\n<p>This makes 3-piece cans practical for full-body printing and stable artwork control.<\/p>\n<h4>4. Body strength can be improved with beading<\/h4>\n<p>Beads can be pressed into the can wall to improve stiffness.<\/p>\n<p>This helps the can resist deformation during retort sterilization, transport, and stacking.<\/p>\n<h4>5. Better for tall or large cans<\/h4>\n<p>A 3-piece can does not need to be drawn from one metal blank into a tall body.<\/p>\n<p>That makes it more practical for high cans, large-capacity cans, and many foodservice formats.<\/p>\n<h3>4.2 Limitations of Three Piece Food Can<\/h3>\n<h4>1. It has a welded side seam<\/h4>\n<p>The side seam must be welded, coated, and cured.<\/p>\n<p>This adds control points for weld strength, seam coating coverage, curing quality, and corrosion resistance.<\/p>\n<h4>2. It has one more sealing interface<\/h4>\n<p>A 3-piece can has both a bottom double seam and a top double seam.<\/p>\n<p>This does not mean it is unreliable, but it does mean one more sealing area must be inspected and controlled.<\/p>\n<h4>3. The process has more steps<\/h4>\n<p>A typical 3-piece can process includes rounding, welding, seam coating, curing, flanging, beading, bottom seaming, inspection, and packing.<\/p>\n<p>For long-running standard formats, this can be less efficient than a high-speed 2-piece process.<\/p>\n<h4>4. The side seam may affect appearance<\/h4>\n<p>The vertical seam can affect continuous artwork, clear coating effects, or a seamless package look.<\/p>\n<p>For most traditional food cans, this is manageable. The seam can usually be placed away from the main display area.<\/p>\n<h4>5. Structural simplification is more limited<\/h4>\n<p>A 3-piece can uses two separate ends, two double seams, and one side seam.<\/p>\n<p>Actual weight depends on the can design, but compared with a 2-piece structure, there are fewer opportunities to simplify the package.<\/p>\n<h3>4.3 Advantages of Two Piece Food Can<\/h3>\n<h4>1. Fewer potential leakage points<\/h4>\n<p>A 2-piece can has an integrated bottom, so there is no bottom double seam.<\/p>\n<p>This reduces one possible leakage point and is useful for wet foods, retorted foods, meat, seafood, pet food, and ready meals.<\/p>\n<h4>2. Good for high-volume production<\/h4>\n<p>DWI 2-piece cans are well suited to stable, high-volume formats.<\/p>\n<p>When the can size does not change often, the process can provide good speed and material efficiency.<\/p>\n<h4>3. Good lightweighting potential<\/h4>\n<p>In the DWI process, the side wall can be thinned through wall ironing while the bottom keeps more strength.<\/p>\n<p>This can reduce material use without simply weakening the whole can.<\/p>\n<h4>4. No welded side seam<\/h4>\n<p>A 2-piece can has a smooth body surface with no vertical weld seam.<\/p>\n<p>This gives a cleaner appearance and removes the need for side seam repair coating.<\/p>\n<h4>5. DRD cans can support shaped formats<\/h4>\n<p>DRD 2-piece cans can be used for shallow, round, rectangular, tapered, or bowl-like containers.<\/p>\n<p>This makes them useful for seafood, pet food, single-serve meals, and some shaped food cans.<\/p>\n<h3>4.4 Limitations of Two Piece Food Can<\/h3>\n<h4>1. Size flexibility is limited<\/h4>\n<p>The body must be drawn, redrawn, or wall-ironed from one metal blank.<\/p>\n<p>Height, diameter, shape, and corner radius are all limited by the forming process.<\/p>\n<h4>2. Tooling cost is higher<\/h4>\n<p>Different diameters, shapes, or heights often need dedicated tooling.<\/p>\n<p>For low-volume products, trial products, or many small SKUs, this can be hard to justify.<\/p>\n<h4>3. Format changes are less flexible<\/h4>\n<p>A size change is not always a simple line adjustment.<\/p>\n<p>Changing the diameter or body shape may require new tooling, which makes 2-piece cans less flexible for varied product ranges.<\/p>\n<h4>4. Forming control is more demanding<\/h4>\n<p>Drawing and wall ironing place high stress on the metal and coating.<\/p>\n<p>If material quality, lubrication, die clearance, or process settings are unstable, defects such as cracks, wrinkles, uneven wall thickness, coating damage, or poor flange quality may occur.<\/p>\n<h4>5. DWI direct printing is limited<\/h4>\n<p>DWI cans are heavily stretched and ironed during forming, so pre-printed artwork can distort.<\/p>\n<p>DRD cans may allow direct printing, but DWI cans often need decoration after forming or other labeling methods.<\/p>\n<h2>5. How to Choose the Right Can for Canned Food<\/h2>\n<div class=\"table-scroll\">\n<table><caption style=\"caption-side:top;text-align:center;font-size:20px;font-weight:600;padding-bottom:12px;\">Food Can Selection by Packaging Requirement<\/caption><thead><tr><th scope=\"col\">Requirement<\/th><th scope=\"col\">Better Fit<\/th><th scope=\"col\">\u041f\u0440\u0438\u0447\u0438\u043d\u0430<\/th><\/tr><\/thead>\n\n\n\n\n\n\n\n\n\n\n\n\n<tbody><tr><td>One standard size with very high annual volume<\/td><td>DWI 2-piece can<\/td><td>High speed and good material efficiency<\/td><\/tr><tr><td>Wet food with strong concern over leakage risk<\/td><td>2-piece can<\/td><td>Integrated bottom removes one double seam<\/td><\/tr><tr><td>Shallow seafood can<\/td><td>DRD 2-piece can<\/td><td>Good fit for shallow and shaped formats<\/td><\/tr><tr><td>Single-serve pet food<\/td><td>DRD 2-piece can<\/td><td>Works well for shallow or bowl-like bodies<\/td><\/tr><tr><td>Shaped food cans<\/td><td>Shallow drawn can or DRD 2-piece can<\/td><td>Better fit for round, rectangular, tapered, bowl-like, and other shaped bodies<\/td><\/tr><tr><td>Multiple heights under similar diameters<\/td><td>3-piece can<\/td><td>Height changes are easier to manage<\/td><\/tr><tr><td>Large-capacity foodservice can<\/td><td>3-piece can<\/td><td>Better fit for tall or large formats<\/td><\/tr><tr><td>Medium volume with many SKUs<\/td><td>3-piece can or DRD 2-piece can<\/td><td>Better tooling and changeover logic<\/td><\/tr><tr><td>High-quality flat sheet printing<\/td><td>3-piece can or DRD 2-piece can<\/td><td>Better fit for direct printing<\/td><\/tr><tr><td>Long-term stable format with lightweighting target<\/td><td>DWI 2-piece can<\/td><td>Wall ironing supports material reduction<\/td><\/tr><tr><td>New product trial with uncertain demand<\/td><td>3-piece can<\/td><td>Lower risk before committing to dedicated tooling<\/td><\/tr><\/tbody><\/table>\n<\/div>\n<p>There is no universal winner.<\/p>\n<p>Choose a 3-piece can when the product range is broad, the can size changes often, or the package needs a tall or large format. It is also a practical choice when direct printing and size flexibility matter more than maximum line speed.<\/p>\n<p>Choose a 2-piece can when the product format is stable, the demand is high, and the seamless body solves a real packaging problem. It is especially useful for wet products, shallow shaped cans, and high-volume standard cans.<\/p>\n<p>The better question is not &ldquo;Which can is better?&rdquo;<\/p>\n<p>The better question is: what failure mode are you trying to avoid?<\/p>\n<p>If the main risk is leakage from the bottom seam, a 2-piece can has a clear structural advantage. If the main risk is choosing expensive tooling for a product with uncertain demand, a 3-piece can is usually the safer engineering decision.<\/p>\n<p>That is how the choice should be made.<\/p>\n<\/article>\n<script>\n(function () {\n  document.querySelectorAll('.faq-section').forEach(function (section) {\n    section.querySelectorAll('.wp-block-accordion-heading__toggle').forEach(function (button) {\n      button.addEventListener('click', function () {\n        var panelId = button.getAttribute('aria-controls');\n        var panel = panelId ? document.getElementById(panelId) : null;\n        if (!panel || !section.contains(panel)) {\n          return;\n        }\n\n        var isExpanded = button.getAttribute('aria-expanded') === 'true';\n        var icon = button.querySelector('.wp-block-accordion-heading__toggle-icon');\n\n        button.setAttribute('aria-expanded', isExpanded ? 'false' : 'true');\n\n        if (isExpanded) {\n          panel.hidden = true;\n          panel.setAttribute('inert', '');\n          if (icon) {\n            icon.textContent = '\\u25B8';\n          }\n        } else {\n          panel.hidden = false;\n          panel.removeAttribute('inert');\n          if (icon) {\n            icon.textContent = '\\u25BE';\n          }\n        }\n      });\n    });\n  });\n})();\n<\/script>\n\t\t<div data-elementor-type=\"container\" data-elementor-id=\"45061\" class=\"elementor elementor-45061\" data-elementor-post-type=\"elementor_library\">\n\t\t\t\t<div class=\"elementor-element elementor-element-c370fa5 e-flex e-con-boxed e-con e-parent\" data-id=\"c370fa5\" data-element_type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t<div class=\"elementor-element elementor-element-0c8b7c0 e-con-full e-flex e-con e-child\" data-id=\"0c8b7c0\" data-element_type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-f5ac074 elementor-widget-divider--view-line elementor-widget elementor-widget-divider\" data-id=\"f5ac074\" data-element_type=\"widget\" data-widget_type=\"divider.default\">\n\t\t\t\t\t\t\t<div class=\"elementor-divider\">\n\t\t\t<span class=\"elementor-divider-separator\">\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-0836143 e-con-full e-flex e-con e-child\" data-id=\"0836143\" data-element_type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t<div class=\"elementor-element elementor-element-dba680a e-con-full e-flex e-con e-child\" data-id=\"dba680a\" data-element_type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-87d0a39 elementor-widget elementor-widget-image\" data-id=\"87d0a39\" data-element_type=\"widget\" data-widget_type=\"image.default\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<img decoding=\"async\" src=\"https:\/\/www.cnshining.com\/wp-content\/uploads\/elementor\/thumbs\/CEO-Pony-rl92dlnb7ws10luyx873mcxf7ywgvs77xv5lzan74g.webp\" title=\"\u0413\u0435\u043d\u0435\u0440\u0430\u043b\u044c\u043d\u044b\u0439 \u0434\u0438\u0440\u0435\u043a\u0442\u043e\u0440 \u041f\u043e\u043d\u0438\" alt=\"\u0413\u0435\u043d\u0435\u0440\u0430\u043b\u044c\u043d\u044b\u0439 \u0434\u0438\u0440\u0435\u043a\u0442\u043e\u0440 \u041f\u043e\u043d\u0438\" loading=\"lazy\" \/>\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-5930664 e-con-full e-flex e-con e-child\" data-id=\"5930664\" data-element_type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-f907e4b e-con-full e-flex e-con e-child\" data-id=\"f907e4b\" data-element_type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-4639852 elementor-widget elementor-widget-heading\" data-id=\"4639852\" data-element_type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h6 class=\"elementor-heading-title elementor-size-default\">\u041f\u043e\u043d\u0438 \u041c\u0430 | \u0413\u0435\u043d\u0435\u0440\u0430\u043b\u044c\u043d\u044b\u0439 \u0434\u0438\u0440\u0435\u043a\u0442\u043e\u0440<\/h6>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-96f59b6 elementor-widget elementor-widget-text-editor\" data-id=\"96f59b6\" data-element_type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p data-path-to-node=\"7\">\u0421 <b data-path-to-node=\"7\" data-index-in-node=\"5\">25 \u043b\u0435\u0442<\/b> \u041e\u0431\u043b\u0430\u0434\u0430\u044f \u0431\u043e\u043b\u044c\u0448\u0438\u043c \u043e\u043f\u044b\u0442\u043e\u043c \u0432 \u043e\u0431\u043b\u0430\u0441\u0442\u0438 \u043c\u0435\u0442\u0430\u043b\u043b\u0438\u0447\u0435\u0441\u043a\u043e\u0439 \u0443\u043f\u0430\u043a\u043e\u0432\u043a\u0438, \u043c\u044b \u0441\u0442\u0440\u0435\u043c\u0438\u043c\u0441\u044f \u043f\u0440\u0435\u0434\u043e\u0441\u0442\u0430\u0432\u043b\u044f\u0442\u044c <b data-path-to-node=\"7\" data-index-in-node=\"106\">\u044d\u043a\u043e\u043b\u043e\u0433\u0438\u0447\u043d\u044b\u0435 \u0440\u0435\u0448\u0435\u043d\u0438\u044f \u0432 \u043e\u0431\u043b\u0430\u0441\u0442\u0438 \u0443\u043f\u0430\u043a\u043e\u0432\u043a\u0438<\/b> \u0441 \u043f\u043e\u043c\u043e\u0449\u044c\u044e \u0438\u043d\u043d\u043e\u0432\u0430\u0446\u0438\u043e\u043d\u043d\u044b\u0445 \u0430\u043b\u044e\u043c\u0438\u043d\u0438\u0435\u0432\u044b\u0445 \u0442\u0435\u0445\u043d\u043e\u043b\u043e\u0433\u0438\u0439. \u0418 \u044f \u0440\u0435\u0433\u0443\u043b\u044f\u0440\u043d\u043e \u0434\u0435\u043b\u044e\u0441\u044c \u0438\u043d\u0444\u043e\u0440\u043c\u0430\u0446\u0438\u0435\u0439 \u043e\u0431 \u0438\u043d\u043d\u043e\u0432\u0430\u0446\u0438\u044f\u0445 \u0432 \u043c\u0430\u0442\u0435\u0440\u0438\u0430\u043b\u0430\u0445 \u0438 \u0433\u043b\u043e\u0431\u0430\u043b\u044c\u043d\u044b\u0445 \u0441\u0442\u0440\u0430\u0442\u0435\u0433\u0438\u044f\u0445 \u0437\u0430\u043a\u0443\u043f\u043e\u043a, \u0447\u0442\u043e\u0431\u044b \u043f\u043e\u043c\u043e\u0447\u044c \u0431\u0440\u0435\u043d\u0434\u0430\u043c \u043e\u0441\u0442\u0430\u0432\u0430\u0442\u044c\u0441\u044f \u043a\u043e\u043d\u043a\u0443\u0440\u0435\u043d\u0442\u043e\u0441\u043f\u043e\u0441\u043e\u0431\u043d\u044b\u043c\u0438.<\/p><p data-path-to-node=\"8\">\u0414\u043e\u0431\u0440\u043e \u043f\u043e\u0436\u0430\u043b\u043e\u0432\u0430\u0442\u044c, \u0441\u0432\u044f\u0436\u0438\u0442\u0435\u0441\u044c \u0441\u043e \u043c\u043d\u043e\u0439! <a href=\"http:\/\/www.linkedin.com\/in\/bottle\" target=\"_blank\" rel=\"noopener nofollow\"><b data-path-to-node=\"8\" data-index-in-node=\"30\">LinkedIn<\/b><\/a> \u0434\u043b\u044f \u043e\u0431\u0441\u0443\u0436\u0434\u0435\u043d\u0438\u044f \u043f\u043e\u0441\u043b\u0435\u0434\u043d\u0438\u0445 \u0442\u0435\u043d\u0434\u0435\u043d\u0446\u0438\u0439 \u0432 \u043e\u0442\u0440\u0430\u0441\u043b\u0438.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"<p>Learn the key differences between 3 piece can vs 2 piece can, including structure, sealing, cost, production, and best uses for canned food.<\/p>","protected":false},"author":1,"featured_media":49193,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[94],"tags":[],"class_list":["post-49186","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-metal-can"],"_links":{"self":[{"href":"https:\/\/www.cnshining.com\/ru\/wp-json\/wp\/v2\/posts\/49186","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.cnshining.com\/ru\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.cnshining.com\/ru\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.cnshining.com\/ru\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.cnshining.com\/ru\/wp-json\/wp\/v2\/comments?post=49186"}],"version-history":[{"count":1,"href":"https:\/\/www.cnshining.com\/ru\/wp-json\/wp\/v2\/posts\/49186\/revisions"}],"predecessor-version":[{"id":49189,"href":"https:\/\/www.cnshining.com\/ru\/wp-json\/wp\/v2\/posts\/49186\/revisions\/49189"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.cnshining.com\/ru\/wp-json\/wp\/v2\/media\/49193"}],"wp:attachment":[{"href":"https:\/\/www.cnshining.com\/ru\/wp-json\/wp\/v2\/media?parent=49186"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.cnshining.com\/ru\/wp-json\/wp\/v2\/categories?post=49186"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.cnshining.com\/ru\/wp-json\/wp\/v2\/tags?post=49186"}],"curies":[{"name":"WP","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}